But All Of The Other Guys SaidThe Long Version With Hyper-Links To More Useful Information.

But All Of The Other Guys Said!!!!! I hear this more often than you would believe.  You know what the most frustrating thing about that phrase is?  In practically every single instance, the “Other Guys” either did not really know what they were talking about, or even worse, they knew the right thing to recommend, but took the “Low Road” and did not advise you, the Home Owner about the implications of not doing your roofing project precisely as the manufacturer specified.You might think to yourselves; the “Other Guy” seemed like he knew what he was talking about though.  Ed, what makes your opinion any better and more valid than his?  Aren’t you both just out here to try to sell me a roof and make as much profit on the job as possible?Here is what I say to that; There obviously is some truth to the fact that a reputable company, such as Right Way Roofing Company, which has been serving this area for over 23 Years under the same name and ownership needs to remain profitable to remain in existence.  Yes, I spend a great deal of time with every single Home Owner I make a detailed presentation to; Therefore: Yes, I would like you to understand the value of investing in a quality, properly done roofing system as compared to over 90 % of all roofs done, which do not even meet the “Minimum” standards and specifications.  How can I make a statement like that?  I know the current “Facts” by staying on top of the Roofing and Ventilation Industries and by continually doing intense pertinent research, as you will discover from just browsing through or hopefully from thoroughly digesting the following informational tidbits excerpted from some of the best resources I have discovered, and am now sharing with you for your benefit and prudent decision making process now being contemplated.      Before I begin to ramble on endlessly and bore you with any self glorifying promotion, you may feel concerned enough to read through the following short portions of just a few of the research links I have provided.   This way you will receive a totally unbiased, neutral and objective opinion on some of the subjects that seem to be in conflict from one contractor to another.If your investment in the future of your home is important enough to you, please feel free to inquire with as much vigor and depth as possible to arrive at the safest and wisest conclusion.   The following resources are all referenced as to author and web-site URL links for further analysis if you so desire.  If you would prefer this document to be e-mailed to your attention, so you do not have to type in and search for the web sites, please request an e-mail version and I will gladly comply.When you get done reading through the information; Please ask yourself the following question:  Who was the one who really gave me all of the correct advice, details and specifications to ensure my new roof and theoretical warranty plus my homes interior were not being placed in jeopardy?Was it Ed, from Right Way Roofing Company?Or, was it “the Other Guy”?I hope you appreciate the following information.  Happy Reading!http://www.bobandrodman.com/roofing.html

This is one of the best articles I have ever read about roofing specs being followed and “How to choose a good roofer”.

But over the years I have learned to spot good roofers by asking a few questions and identifying a number of indicators that seem to reveal what they really know about their trade and what kind of job they are likely to do. What I am looking for are those rare individuals who take pride in their work. They keep up with advances in materials and techniques. They make it a point to take to take questions to manufacturer’s technical representatives. They’re responsive to the concerns of their customers. And they are glad to take as much time necessary to explain things clearly.Roofing isn’t rocket science. But the average homeowner is not really familiar with the ins and outs of roofing so they have little choice but to depend on whomever they choose to do the work. This is a trust professionals take seriously. It is not enough that they are concerned and personable – they must also have sufficient resources of experience and knowledge to insure that their professional obligation is discharged to the homeowner’s advantage. That’s why professionals are easy to spot. If you feel educated, as well as comfortable after your visit with a roofer, and the other criteria outlined below are satisfied, then you are as assured as possible that your job will meet your expectations.   


Now about those shingles. Despite all the brands and styles, one thing is common to all: Put them up wrong and their guarantee is void. How is it then that they are so often installed incorrectly?

You might have requested “30-year” shingles, but they are only as good as their installation allows.

From Google search:  http://www.google.com/search?hl=en&q=inadequate+ventilation+decreases+shingle+life


This is an article regarding solar powered attic fan and attic ventilation as a requirement for the shingle manufacturers’ warranty.

When the attic space overheats, the shingled roof will heat on the underside of the shingles. This causes unnecessary wear and tear on your shingles and you risk wearing them out before the end of the warranty period. Shingle manufacturers are aware of this and require ventilation for a correctly installed roof to be covered under their warranty. This information can be found on the shingle package wrapper. Most shingle manufactures even offer formulas on their web sites, which will assist you in determining just how much attic ventilation is required.Without adequate attic ventilation, the manufacturer may consider it an incorrect installation. What does this mean?For example, imagine that you paid $4000.00 for the installation of a 25-year shingle. However, after 10 years it appears as though the corners are curled, and it’s leaking. You contact the shingle manufacturer and complain of shingle failure. They examine the shingles under a microscope and determine that the excessive wear was from overheating caused by lack of adequate ventilation. Unfortunately, the warranty only covers correctly installed shingles and yours were not. This results in another $4000.00 for a new roof, or your INDIRECT expense for inadequate attic ventilation.<Now, add inflation and the actual increases occurring in the petroleum industry and future increases in labor costs into the factor, and clearly, the cheaper roof done incorrectly, would actually would cost significantly more than if you had chosen to “DO IT RIGHT THE FIRST TIME.”>

Most asphalt based shingles will fail in 14 to 15 yearsMost structures that were built before 1990 have inadequate ventilation of their building.Most consumers believe that 30 pound felt is better. Felt is an underlayment used to keep the plywood dry until the shingles can be installed “and to prevent the pitch from wood products having an adverse affect on the newly installed shingles.”



2. VENTILATIONInadequate ventilation of attic spaces can cause accumulation of mois­ture in winter months and a build up of heat in the summer.These conditions can lead to: 1. Vapor Condensation 2. Buckling of shingles due to deck movement. 3. Rotting of wood members. 4. Premature failure of roof.To insure adequate ventilation and circulation of air, place louvers of sufficient size high in the gable ends and/or install continuous ridge and soffit vents.   


Most roofs are installed incorrectly, i.e.; 98-99%Operator ErrorThe construction industry (of which I was a participant for 20 years) has a major flaw. The learning process in virtually every field is either visual or verbal. Young people beginning to work in the industry simply learn by doing what they are told or by watching more experienced individuals. There is very little reading that takes place. The only widespread exposure of written learning material that I am aware of is the textbook material available to vocational students or those few who go through apprenticeship programs, with a local Certified Union Training Program.Relying on verbal or visual information is simply not acceptable in today’s world. Professionals in fields other than building and remodeling are formally educated and continue to read on a regular basis about changes in their profession. A construction worker who is just entering the field may be taught by an individual who has been doing something wrong or against manufacturer’s recommendations for years. In many instances, these individuals do not even realize that they are making mistakes. Many individuals who install asphalt roofing shingles do not follow written, established roofing practices as outlined by manufacturers and roofing associations. This is prevalent in the industry. In fact, in my own hometown, I am aware of only one roofing contractor who correctly installs asphalt shingles! That means that 98 to 99 percent of all the asphalt roofs installed in Cincinnati are susceptible to leaks or premature failure. The same thing quite possibly is happening in your city or town.  http://www.resercon.com/Ventilation.htmlThough the cold roof cost more to install, the difference is that of instead of your roof only lasting 15 years, it will last 30 to 40.  <A “Cold” roof actually implies a properly Balanced Attic Fresh Air Intake System working together with a Continuous Hot/Humid Air Exhaust System.  The best type of exhaust system usually will be a continuous Ridge Vent, which contains Wind Deflecting Baffles and an Internal Filter, to actually aide the physics and aero-dynamics of the natural wind forces in play, to increase the amount of Hot Air Exhaust capable of being discharged from the interior of the attic environment.> 


Shingles installed on a private home or residence (as opposed to an apartment building, for example) will qualify for a warranty duration of only 10 years with respect to shingle problems related to the absence of adequate roof ventilation.This 10-year warranty duration applies even if CertainTeed’s “top-of-the-line” ( 50 Year Through Life Time ), shingles have been used.      


Have you ever observed a jack rabbit? They are extremely fast as they hop across the prairie pausing occasionally to catch their breath. I have applied that term to many roofers based on similar movements while operating roofing nail guns. While speed is important in doing any job, it is not the most important facet of a job. Safety and accuracy rank much higher than speed in my book when you are trying to achieve a quality job.Nearly all roofers know the correct placement of nails in a roofing shingle but in real practice very few actually get the nails in the right spots. Every shingle wrapper gives explicit instructions about this. So what is the problem?

Roofers are normally compensated by the amount of shingles nailed down on a given job. The quicker they can nail them down, the more they make. After all, the roof LOOKS the same whether it is nailed correctly or incorrectly. Shingles that are incorrectly installed tend to develop problems later such as blow-off in high winds, slippage in hot weather and leaks.Manufacturers will not warrant their shingles if they are installed incorrectly. The correct nailing pattern is four nails per shingle with the two outside nails being within one inch of each end and the other two being evenly spaced between the ends. Six nails are advised for areas noted for high winds. The nails should not be too high on the shingle or too low. On a dimensional shingle, it is imperative to locate the nails along ‘the nailing strip’, a one inch wide portion of the shingle. Jack Rabbit roofers cannot possibly hit this nailing strip on a consistent basis and still maintain speed. Jack Rabbit roofers tend to ‘spray’ their nails. They sound impressive and fast while working but the actual truth is they are doing a very poor job.I have had many job applicants who boast, “I can nail down four square an hour.” I would never hire someone like this. I look for quality rather than quantity. It is better to do a job right and have it last than to do it wrong and have problems with it later. On three-tab roofs, many roofers will only use three nails per shingle to gain speed but the roofs show lifting just a few years later. 


It is estimated that 9 out of 10 homes in North America do not have proper attic ventilation. 


This one references conclusions from the NRCA, the National Roofing Contractors Association.9 out of 10 attics are inadequately ventilated  http://www.alcoa.com/alcoahomes/LearningCenter/ArticleVentilationSoffit.aspxExperts say inadequate intake ventilation causes 95% of all ventilation problems and will typically void the shingle warranty. http://www.hvi.org/assets/pdfs/CPD_Sec2_05142007.pdf           HVI = Home Ventilation InstituteSoffit VentsLVP10                    Double 5”              Lanced V-Panel Soffit 9.6 in²LVP12                    Double 6”              Lanced V-Panel Soffit 11.4 in²CVPT4                   Triple 4”                                 Center Lanced V-Panel Soffit 4.9 in²LVPT4                   Triple 4”                                 Full Lanced V-Panel Soffit 14.8 in²CVPQ4                  Quad 4”                                 Center Lanced V-Panel Soffit 6.2 in²LVPQ4                   Quad 4”                                 Full Lanced V-Panel Soffit 10.2 in²8VTL                      8”                           Vertical Lanced Soffit 10.5 in²


Ventilation Controls for Life-Styles, presented by the HVI Sales & Marketing Committee In recent years, as new homes have become more airtight, the awareness of the need for residential ventilation has been growing more than ever. Proper ventilation is essential to removing excessive moisture, which promotes mold and mildew build-up and can deteriorate the building’s structure. Ventilation is also important to help reduce the buildup of volatile organic compounds (VOCs) that affect indoor air quality (IAQ) and may cause health problems for occupants.


Static vents, both intake and exhaust, are not electrically powered and depend on natural airflow for ventilation. Intake vents are necessary whether using a static exhaust system or a powered attic ventilator. Static vents include ridge vents, roof vents, gable vents and turbines. 


This is a very, very good in depth author, inspector, consultant, and Expert Court Witness.First, confirmed that every roof has continuous soffit inlet vents that are fully open and functioninghttp://www.roofcalculator.com/attic_ventilation.htmIn homes that have a steeply pitched roof and are over 20 years old, a 98% probability exists that the attic has excessive heat-and even newly constructed homes often have serious attic heat problems. http://ezinearticles.com/?next=1&index=30&order=DESC&cat=Home-Improvement:RoofingTo properly ventilate an attic, two types of vents are needed. Intake vents, which are located at the down slope edge of the roof (a.k.a. eaves) and allow fresh air into the attic; and exhaust vents, which are located near or on the ridge line of the roof and allow air to leave the attic. The use of an exhaust vent in conjunction with an intake vent uses the natural forces of wind pressure and thermal effect, collectively known as the Stack Effect, to ventilate the attic space.  


Code Requirements:
Each of the four model building codesThe BOCA National Building Code, International Building Code, Standard Building Code and Uniform Building Code—require attic spaces to be ventilated. Generally, building codes require that a minimum net free ventilating area for attic vents be a 1-150 ratio of the area of the attic space being ventilated. The four model building codes also generally allow for a reduction of the ventilation ratio from 1-to-150 to 1-to-300 if attic vents are balanced on a roof and/or a vapor retarder is installed on a ceiling assembly’s warm side. http://www.roofhelp.com/ventilation_main.htmCalculating how much venting your attic needs is relatively simple. All you need to know is the area of the attic floor. Include the garage, if you have one and the soffit overhang because heat gets trapped above them, too.To properly ventilate an attic, two types of vents are needed. Intake vents, which are located at the down slope edge of the roof (a.k.a. eaves) and allow fresh air into the attic; and exhaust vents, which are located near or on the ridge line of the roof and allow air to leave the attic.  

There are several common misconceptions about attic ventilation. One is that many people think that if they have only power vents or turbine vents working near the ridgeline, then their attic is properly ventilated. Remember that in order for an exhaust vent to properly function, it has to have intake vents working with it. If there are no intake vents, then air has to enter somewhere so it will enter through some exhaust vents and exit through others. The result is circulation of only the air immediately surrounding the vents or in between the vents.


Attic Ventilation

The eave vents on the underside of roof overhangs gradually become clogged and reduce essential attic ventilation.

Clogged eave vents increase air conditioning costs by reducing the removal of attic heat during the summer.

Clogged eave vents increase the odds of mold and moisture damage in the attic.

Eave vents should be checked at least every five years. Clogged eave vents should be cleaned or replaced.

Building codes typically require a net free ventilating area equal to 1/300 of the total area to be ventilated, one-half of the ventilation to be provided in the upper portion of the space to be ventilated with the balance provided by eave or cornice vents. http://www.inspectionconcepts.com/new_page_2.htmNot so!  Most roofs fail in 10 to 15 years. Very few roofs last past 15 years!


90 * = 170 * or more, roof top temperature      http://www.langcoroofing.com/We’re probably not going to be the lowest bidder.Shocked that we would admit that? We’re not…after more than 30-years, we’re proud of that fact. Our reputation has been built on doing quality work – rather than the fastest and cheapest.When it comes to protecting your largest investment with a roof that lasts…is it always wise to go with the lowest bid? Would you get surgery on your foot done by a low bid doctor? In fact, we get a lot of business from people using a low bidder and realize that it cost them in the long run when the first signs of problems show up years later. You won’t see most of the damage caused by cheaper materials…your roof will look nice and it’ll be brand-new…but what’s hiding underneath? Did they short-change you on the plywood? Did they use a premium brand of ice and water shield? Did they use any? Were the workers more caring about the quality of the work or the paycheck at the end of the day? Is your roof properly ventilated? If not, that manufacturer’s warranty you got may be worthless.Sure, you can compare estimates…and we’d love to match up the estimates you get with ours.

Because you can’t put a price on honesty, integrity, passion and experience.


Still another factor affecting asphalt shingle roofs is attic ventilation. Proper roof ventilation is critical in extending the service life of a roof. Proper intake and exhaust ventilation lowers heat and moisture in the attic. Inadequate ventilation may also void your material warranty.

Shingle manufacturers will not warrant their products against “Acts of God or Nature” such as hurricanes, hail storms, severe winds usually in excess of 50 mph, tornadoes, earthquakes, etc. Nor will shingle manufacturers honor their material warranty if the products are improperly installed. This includes improper roof ventilation.


Building Contractors are different than you and I, in what way you ask? They start a job knowing that it will end in a short period of time usually on a set budget, or bid price. So, the quicker they finish the more they make. Time is money! If they have another job behind yours, as they often do they go rip roaring ahead to get your job done.At his stage of home construction we put on the roofing. We choose composition because it is durable and I didn’t want to pay for a metal roof. Clearly the metal would last longer, but I like the way the architectural composition looks, and it was 50% less. One note about roofing make sure you get a good roofing company with a good warranty. In other words do your Research. There he goes again! The warranty is especially important if you have a roof with complicated angles and many valleys. We do, and we have had a couple of leaks. We could have gone with the low bid Roofer but choose a company with a good reputation and a 5 year warranty, it has paid off! That brings me to one last point. It is so important to do your RESEARCH prior to hiring a Building Contractor. You must do everything in your power to stick with the ones you start your project with. Why? Because if you have to hire another one in the middle of the project it will cost you time and money. Life is much easier if you choose correctly up front. 

http://www.hunterhomeservices.com/attic.html  Referencing the Shingle Vent II, which I specify.

This is the most attractive and efficient ventilation device. Its low profile design minimizes its appearance on the roof, while its external baffle provides maximum air flow. It is installed along the ridge of the roof beneath the ridge shingles. This type of ridge vent creates the greatest air flow in all wind conditions by creating a negative air pressure that effectively pumps air from the attic.


How important is ventilation?

Attic ventilation serves several purposes during all four seasons of the year, among them being added comfort, protection against damage to materials and structure, and reduced energy consumption. But the most important function is to provide a uniform flow of cool air along the underside of the roof sheathing which in turn carries the heat out of the attic. Proper ventilation is also required in order to validate the manufacturer’s warranty for your roofing system.



You may be asking yourself, “What can I expect a roof to look like as this aging process takes place?” One or more of the following conditions may occur over time.
As the asphalt hardens over time, the granules which were once securely embedded begin to break away. Occasionally you may have seen the colored granules in gutters. Also, as this hardening advances, the asphalt layers begin to shrink. Of course, all this is occurring at a microscopic level and is no noticeable on a daily basis. As the asphalt layer shrinks, it is being countered by the shingle reinforcement, which resists shrinking. We now have a situation in which the top and bottom coatings are shrinking and the reinforcement is remaining stable. As a result, the edges of the shingle may begin to curl.

Surface Cracking
Another manifestation of the normal aging process may be the development of surface cracks. For example, as the flexibilizing oils of the asphalt are depleted due to heat, the shingle becomes more brittle, to the point where surface cracking may appear. The stresses created by thermal shock and the movement of the roof deck also increase the likelihood of surface cracking.
During the course of natural weathering, small bubble-like raised areas known as blisters may appear on the surface of the shingles. The blisters may be small and pea-sized, or as large as a quarter. The blisters may be open, exposing the asphalt, or closed. Blisters frequently result when minimum ventilation requirements are not met.Staining
Finally, over a period of time, shingles may develop dark brown or black streaks that are sometimes mistaken for soot, dirt, moss or tree droppings. In actuality, this discoloration may be caused by algae growth. Although most roofing systems are susceptible to algae discoloration, it is most readily visible on white or light-colored shingles.
On structures with attics and proper ventilation, light and dark shingles should last about the same amount of time. Without proper ventilation, it is possible that the darker shingles might have a shorter life as a result of their tendency to reach higher temperatures due to increased absorption of solar energy. The hotter deck may bake the shingles, causing the asphalt to become brittle and the shingles to fail prematurely.

Deck movement and deterioration are commonly the results of poor ventilation. In the summer, too much heat buildup due to a poorly ventilated “flat ceiling” attic can cause the shingles to deteriorate prematurely. In the winter, deck-related problems are often due to condensation forming on the deck underside, which is also a result of poor ventilation. It is important to understand that shingles failing before their time due to inadequate ventilation will not be protected by the manufacturer’s warranty.

When we look at the performance of the roof system as a whole, underlayment has a legitimate role to play. Underlayment is considered to be an important component in the UL (Underwriters Laboratory Inc) fire resistance classification. It can provide backup protection in case of a shingle blow-off, and during the installation of shingles it can keep the unshingled decking dry.
On slopes below 4/12, down to 2/12, the risk of leaks is great, caused by phenomena like wind-driven rain and capillary action that can make water flow uphill, or by the backup of water behind ice dams. To reduce this risk, a redundant systems called “shingle underlayment” is applied beneath the shingles. Shingle underlayment, also known as tar paper and roofing felt, is a roll product applied over the roof deck before the shingles are installed. The term “underlayment” is not to be confused with the flooring sub-base. The OSB on a roof deck is not shingle underlayment; it is properly termed roof sheathing and must be rated by the American Plywood Association as such. On the other hand, not all shingle underlayment is the same. There are two critically different grades: water-resistant and waterproof. Water-resistant underlayment was invented to keep the roof decking dry until shingles could be applied. Applying this underlayment is called “drying-in the roof.” It was also useful as a separation sheet between the roof sheathing boards and the asphalt shingles before OSB and plywood sheets were used as roof decking. This separation was important because direct contact with resin pockets in the pine planks caused the asphalt to degrade prematurely. Intact water-resistant underlayment sheds most of the water that falls on it, but its water resistance is temporary. As the sun degrades the exposed asphalt the material begins to dry out, absorb more moisture, lose its strength, and eventually tear. The less asphalt used to saturate the underlayment sheet during manufacture, the shorter its life. Since asphalt is the most expensive component of shingle underlayment, lower-priced materials have less asphalt and a shorter life when exposed to the sun, and are also subject to severe wrinkling when wet or even just damp. Water-resistant shingle underlayment is not warranted by the manufacturer.  It is an expendable material because much of its water resistance is destroyed during the installation of shingles by driving hundreds of nails through it. Until recently, only two grades of water-resistant underlayment have been available: Number 15 (standard) and Number 30 (heavy-duty). In recent years new categories have appeared known as premium and high-performance shingle underlayment. These materials are less likely to wrinkle when dampened. Waterproof underlayment is an entirely different product that’s used in locations such as eaves and valleys that are most likely to leak under extreme conditions such as high winds, heavy rains and ice dams. This material is known as WSU (waterproofing shingle underlayment).
On low slopes where the risk is water running uphill, or in valleys where blockage from storm debris or ice dams can cause trouble, WSU is reliable insurance against leaks when used according to the manufacturer’s instructions. In all cases the product must be applied to a clean, dry roof deck.
The roof deck is most vulnerable to leaks where it meets a vertical wall, at penetration sites such as a soil pipe or chimney, or at changes in slope such as at a valley, saddle, mansard, hip, or ridge. This vulnerability is due to:
1. Deferential movements (e.g., the roof deck moves but the chimney does not).
2. An accumulation of turbulent water (e.g., in valleys and on the high side of chimneys).
3. An accumulation of melting snow or ice (e.g., in valleys and on the high side of chimneys).
4. Breaks in overlapped shingles (e.g., at hips and ridges).
Flashing is installed at these locations to bridge adjoining structures and prevent water penetration. Flashing materials include sheet metal; cements, caulks, and sealants; and flexible sheets such as waterproofing shingle underlayment. At hips and ridges the cap shingles, not normally called flashing, serve the same function. Leaving out ice dam backups
and catastrophic damage from severe storms, old age, or gross manufacturing defects, leaks are most likely to originate at a  flashing that has failed or was improperly installed.

Laminated shingles: There are many different brands and sizes of laminated shingles.
Mid-Weight Dimensional Shingles: These shingles offer a more interesting appearance on the roof than three-tab shingles. Typically they weigh 235-265 lbs./sq. Shadow lines and contrasting color blends are common.
Heavyweight Dimensional Shingles: The heavyweights are sometimes called architectural shingles. Typically they weigh 265-350 lbs./sq. Shadow lines and contrasting color blends give the appearance of a thick shingle.


The Life Cycle of Your Roof

Research has confirmed that improperly ventilated air space inhibits air movement and under most circumstances increases moisture content in comparison with properly vented attic air spaces.  Heat shortens the shingles’ life and moisture causes deck movement and/or deterioration, which ultimately affects the performance of shingles.    


While manufacturers warranties will vary in terms of what is and is not covered and for how long, most offer reasonable value and protection for the end user. However, it is important to realize that should the product be installed improperly, even the best warranties on the highest quality materials may be rendered void and useless. The manufacturer has a right to expect that their product is aligned, lapped and fastened to meet their minimum requirements, otherwise their product will not perform as designed and the warranty will become invalid. 


Roofing is number 1 Construction Defect.Construction Defect Problem Areas: Cause & Effect. Taking a forensic view, or a backward pass, through a statistically significant sampling of Construction Defects (CDs) in order to determine the root cause & effect, we have categorized the most prevalent CD’s into a Top 10 List as follows:

  1.  Roofing  
  2. Sheet Metal Flashings

 http://www.professionalroofing.net/article.aspx?A_ID=218 Intake vents are important to achieve proper ventilationby Paul Scelsi If you are not convinced about how important intake vents are to attic ventilation systems, consider this: Intake vents are the single biggest reason for most attic ventilation callbacks Dallas-based Air Vent Inc. receives. Not the exhaust vents—the intake vents. For an attic ventilation system to perform properly, it needs a balance of intake and exhaust. Unfortunately, too many houses have sufficient exhaust but inadequate intake. The potential problems vary with the type of exhaust vent being used. For example, insufficient intake can cause an externally baffled ridge vent to pull intake air from itself. That means it could pull in weather. With a power attic ventilator, improper intake could cause premature motor burnout and force the power vent to pull its source of intake air from the living space in the home.       I hope that I have not gone overboard with the information supplied.  I am passionate about providing the absolute best roofing materials and the best service as possible.  Therefore, even though this may seem mundane and obsessive over-kill to you right now, you can at least get a better sense of how I feel about doing your roof on your home, the Right Way.  When your home is taken care of with such passion, you will be proud and glad you chose to do things the Right Way after all. Respectfully and Very Sincerely, Edward G. Fako  (Aka, Ed the Roofer, who provides sought after expert advice on many contractor, home inspector and homeowner advice forums on the internet.) Biography of Ed’s Previous and Continual Roofing Experiences and Education:
Since 1978, Ed served his Apprenticeship with the Chicago Roofing Contractors Union Local 11, achieving Union Journey-Man status one year earlier than scheduled, due to his immediate Supervisors and Foreman’s recommendations, has been involved in all phases of Roofing and Architectural Sheet Metal work, BUR, Single Ply Membranes, Shingles, Cedar Shakes, Clay-Concrete & Slate Tile and has proudly operated Right Way Roofing Company for the past 23 years.  Ed is proud to be associated with the following Industry Organizations; ARMA, (the Asphalt Roofing Manufacturers Association), the CRCA, (Chicago Roofing Contractors Association), the MRCA, (Midwest Roofing Contractors Association), the NRCA, (National Roofing Contractors Association) and NARI, (the National Association for the Remodeling Industry).

He is a selected member of the “Professional Roofing Advisory Council”, a recipient of the Master Roofer Award, regularly recertifies as a V.I.P, (Ventilation Installation Professional), has passed and continues to study and administer the Master Shingle Applicators Test to other Roofing Contractors and Apprentices, was selected as an articulate informational unbiased Moderator for the ContractorTalk dot com Forum with over 14,000 registered Contractor Members, and regularly contributes Veteran advice on JLC Online dot com, Roof-Links dot com, DIY Chatroom dot com, NACHI dot org, ( the National Association for Certified Home Inspectors) and Home Owners For Better Builders, HOBB dot org in his ongoing passion to assist those in need of impartial Roofing and Attic Ventilation advice.Words to Live By:  “You can’t put a price on Honesty, Integrity, Passion and Experience.”

Explore posts in the same categories: Tips On How To Select A Roofing Contractor

One Comment on “But All Of The Other Guys SaidThe Long Version With Hyper-Links To More Useful Information.”

  1. Charles Says:

    Good information Ed! Without a doubt you do your homework.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: